Roosevelt Series with Cleanroom Laminate Top and Square Cut Edge

As low as $192 Regular Price $192

Model

RCRE

Skip to the beginning of the images gallery

Factory Assembly Available.
1.2" Thick Top.
.020 Thick Laminate.
Cleanroom Class 100.
Steel Reinforced Top.
1,200# Capacity Apron.
16-gauge Strong Cold Rolled Steel.
Adjustable Legs, 30" to 36".

Note: BenchPro™ is primarily known for our high quality benches which assemble easily and carry extreme loads. This Roosevelt Series bench is our economy model. We designed it to be the strongest and easiest to assemble of the current economy market offerings.

Even though many companies use this design bench successfully in their production areas, we want to advise the differences. It has left to right steel reinforcing underneath the top and has been tested to hold over 1,200 pounds when the weight is evenly distributed. Even so, it will show minor downward deflection in the the center, especially when loaded heavily.

This bench design, whether made by us or another manufacturer, takes about half an hour to assemble, compared to less than 2 minutes for our other series benches.

Unconditional Warranty

PRINT

Workbench Warranty

BenchPro™ has been producing the nation's strongest, longest lasting ergonomic workbenches since 1987. We are so sure our products will perform properly, we offer the following warranty:

BenchPro™ benches, options and accessories are warranted to the original purchaser for 25 - years. This includes every component and every function.

Exceptions:

Eisenhower series are warranted for ten years.

Workbenches used in multiple shift operations shall have the warranty prorated accordingly.

Hydraulic bench lift - system components are warranted for ten - years.

All lighting products are warranted for ten - years.

BenchPro™ will either refund the entire purchase price including freight and tax (if any) or replace the product or component that is defective, and pay for the freight.

Product Returns:

As we make all products from base materials, we charge a "restocking charge" on products returned if for no fault of ours. We also charge a restocking charge for products ordered but cancelled after the product is built. We do not accept used product back. If returned product is due to our fault, we credit the full cost, and freight.

Restocking charge schedule:

A. All Workbenches and Accessories in standard sizes and colors will be charged 25%.
B. Any bench in a custom size or color will be charged a 50% restocking charge, as we will have a difficult time reselling them.
C. Chemical Resistant tops will be charged an additional 10% restocking charge, above those listed above.
D. Custom and non-catalogue items are non-returnable.
E. No product shall be returned after 90 days.

No return of defective product is ever required. (We may ask for an electronic photo in cases where we have not seen the problem before).

From the lawyers: In no case shall BenchPro™, its distributors, employees, related divisions, and other entities be responsible for any direct, consequential or indirect damage caused by the use, inability to use, or incorrect use of our products. Our liability shall be limited to replacement of product or a full refund.

Due Diligence: Please, if a chair or workbench is found to be defective in a way that could lead to an accident, take it out of service and tag it as dangerous until replacements or replacement parts are received and assembled. Dangerous products should not be put into open waste disposal systems until they have been made unusable, so that no third party can reclaim them and be injured.

Ease of Assembly

Roosevelt Series Bench Assembly.

1. Place the bench box on top of a table or other elevated surface to make work easier. Now open the flaps on the box, fold them down, but do not remove the box.

2. Find the predrilled holes at each end of the top which match the hole pattern in the upper frame. Insert screws in every hole.

3. Slide the adjustable leg set into the upper bracket until it is in position to give you the desired height. Attach with fasteners provided. Tighten securely.

4. Line-up and install leg reinforcing bar across the back legs. You're done!

5. Have someone help you turn it over.

Popular Accessories

View All Accessories
	Drawers These fully-welded drawers hold up 100 lbs.
	Shelves Choose from upright-mounted, riser or under-shelves.
	Lights Add fluorescent or LED lights above your workbench.
	Uprights Add shelves lights or accessories above your workbench.
	Power Strips Add UL listed power strips to your workbench.
	Bin Rails Add convenient bin access to your workbench.
	Casters Make your workbench mobile with these non-marring casters.
	Articulating Accessories Choose from Monitor and Document Holders.
View All Accessories