Individual Drawers Standard 21" Wide
As low as
$147
Regular Price
$147
Model
T
- Full Ball Bearing Suspension.
- Full Extension Suspension.
- 100# Capacity .
- Powder Painted To Match.
- Fully Mig Welded/Assembled.
- Length Front to Back 20", 21" Wide.
- Steel Thickness 16 & 18-Gauge.
- Chromed Tumber Lock.
- Solid Stainless Steel Face.
Drawers Assembly
1. Assemble drawer when you assemble the frame.
Slide the two female tabs on the bottom of the drawer case onto the male tab on the bench frame. It will only slide on straight if it is properly centered. (The drawer is removed from the case to make this photo, but you don't need to remove it before assembly).
2. Reinstall and tighten the two bolts. You're done!
